Saab 93 Key Fob Replacement
Saab keys can be expensive to replace. The process is simple.
You will require a phillips screwdriver that is flathead and a bit of patience. The screwdriver should be inserted into the middle of the case, and slowly open it.
It is recommended to keep spare fobs and keys. You can avoid being left stranded and paying towing fees.
How do I replace the battery?
All car key fobs that lock and unlock the vehicle remotely contain a battery inside that will eventually fail. When that occurs, owners can replace the battery in the key fob themselves with a few simple steps. To remove the old battery from the key fob and replace it with a brand new one, you must remove two plastic flaps that are on the opposite side. The standard CR1632 battery is used as a replacement. It is easy to install.
After removing the emergency key, you can make use of the flathead screwdriver on small pieces of wood to break the case. Don't force the case too hard, as the electronics are fragile and may be damaged by too much pressure.

Saab produced some amazing cars. Many of them are still around today. One of the biggest issues with these cars is their ignition keys. They are not very durable, and the keys may become spongy or break off as time passes. It is expensive for an Saab owner to purchase a new key from a dealer in the event that they lose their sole working key. They'll need to replace the computer module, and then program the new key in order to convince the car that you're not attempting to steal it. The good news is that you can save a significant amount of money by replacing the case instead.
How do you remove the Manual Key
Batteries are included in all key fobs used to lock and unlock vehicles. They are of a limited duration. If you're like many they will go out at some point. It's not difficult to replace batteries that you can use to operate the key fob manually. lost saab key is removing the old one from the case, but it's nothing a little patience and some good work with a flathead screwdriver can't assist you with.
Once you have the new battery in place It's now time to put it all back together. You'll need a flathead to unlock the replacement case of the key fob. Insert the screwdriver into the slot in the middle. Carefully work the case until it splits, then you can take it off of the key fob.
You may need to re-program the new key fob in case the previous fob you had lost its connection to the car's security system. You can do this by following the manual learning process to add a new fob for your Saab 9-5 2010. This method does not make keys previously learned invalid however, so you can use your existing FOBs if they require reprogramming. This procedure can only be initiated when the mechanical key of the vehicle is in line with the cut on the FOB.
How do I change the case
Whether you're replacing the battery or the manual key it's best to replace the case as well. These cases are prone to wear out, especially after long-term use. It's simple to change the case of your SAAB 9-3 and you won't require any special tools.
The first step to change the case is to remove the manual key from the key fob. This can be done by pressing the blue SAAB logo on the fob and then pulling the manual key out. It could be necessary to apply a little force to remove the manual key from the fob.
After you've removed your manual key, you're now able to start taking the electronic components from the case. To do this, you'll need an inexpensive flathead screwdriver. Be gentle with your screwdriver to ensure that you don't harm any electronics. Once you've removed all electronics, you'll need to take the battery out. After you've replaced the battery you can put everything back into a new case. You can purchase cases online at very little.
How to Program the New Key
All key fobs, that allow you to lock or unlock your vehicle remotely, are equipped with batteries. However, they have a limited life span. It is important to be aware of this and change the battery in your key fob at least every three-4 years. Fortunately this is a simple process that can be accomplished at home. All you need is a little patience and an inexpensive screwdriver with a flat head.
First, you must remove the manual key. Press the blue SAAB logo and pull the emergency key from the key fob. The key should pop out with a bit of force. Once you have opened the key fob, you can remove the battery by gentle pressing the screwdriver inside the slot that is in the middle. The case will be split, making it easier to access the electronic components.
Once you have the new battery and key fob case installed, it is time to program the new key. This can be done by following the steps in this YouTube video from YouTube Cyclone Cyd. This is a wonderful video channel that provides instructions on how to carry out basic maintenance and repair work on cars.
The key fob is an excellent method of keeping an extra key in your vehicle in case you lose one or break it. You can purchase a new keyfob on the internet or from an authorized locksmith in your area like United Locksmith. The price is less than at a dealership, which will charge you for the key and programming it to the car.